CHAPTER 3 PCL5C - 5
2.2.
Using PCL Color Mode - Set PCL Color Setting
Command
ESC*v#W (27)(42)(118)#(87) <1Bh><2Ah><76h>#<57h>
# = 6, 18
# stands for the number of bytes of data that follow this command.
This command sets the palette size and transformation between the entered value and device-specific value.
This command has two types of format,
short format
and
long format
. Here are the formats for the PCL
color setting.
1) Short
Format
MSB
LSB
0 - 1
Format (0)
Encoding mode
2 - 3
Bits / index
Bits / value #1
4 - 5
Bits / value #2
Bits / value #3
♣
Format
This value must be 0.
♣
Encoding mode
This value defines how to send the raster image data.
The value can be from 0 to 3 only, other values are ignored.
Encoding Mode
0
Send Index No by Plane *
1
Send Index No by Pixel
2
Send Direct Value by Plane
3
Send Direct Value by Pixel
* = default
Send Index No by Plane (= 0 default)
This mode assigns the Index No. to the Plane, then sends it.
The necessary number for the Plane is determined depending on the number of bits/index. 1 (one) plane
should be needed per 1 (one) bit/index. For instance, 4 planes are needed for 4 bits/index.
Bits/index must be 1, 2, 4, 5, 6, 7, 8.
This mode sends the plane data except the last one using the
Send Raster Data by Plane
command
(
ESC*b#V
).
This mode also sends the last plane data using the
Send Raster Data
command (
ESC*b#W
).
(i.e. 4 bits/index)
ESC*b#V d1, d1, d1,
d1
, d1 ...
Plane 1
1st raster
ESC*b#V d2, d2, d2,
d2
, d2 ...
Plane 2
ESC*b#V d3, d3, d3,
d3
, d3 ...
Plane 3
ESC*b#W d4, d4, d4,
d4
, d4 ...
Plane 4
ESC*b#V d1, d1, d1, d1, d1 ...
Plane 1
2nd raster
ESC*b#V d2, d2, d2, d2, d2 ...
Plane 2
MSB
LSB
Index No.
d4 d3 d2 d1
** The Italic characters shown above are the index No. at the 4th pixel in the 1st raster.
Summary of Contents for HL-4140CN
