Control panel setup
26
5
Reset the network settings to the factory default
5
You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
Note
• This function resets all wired and wireless network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management (web browser). (For more information, see
a
Turn off the machine.
b
Make sure that the front cover is closed and the power cord is plugged in.
c
Hold down
Go
as you turn on the power switch. Keep
Go
pressed down until all the LEDs light up, and
then the
Ready
LED turns off.
d
Release
Go
. Make sure that all the LEDs turn off.
e
Press
Go
six times. Make sure that all the LEDs light up to indicate the print server has been reset to its
factory default settings. The machine will restart.