Brother FAX-T98 User Manual Download

Page: 104 / 151

8 - 9

MESSAGE MANAGER

Erasing Messages

If you choose to erase all fax messages, the machine will print any
previously unprinted fax messages before erasing them from
memory. Fax messages cannot be erased individually.

You can erase voice messages individually, or all at once.

To erase voice messages individually

Press

Play/Record

. The machine beeps and begins message

playback. Each message is preceded by one long beep, and
followed by two short beeps.

To erase a specific message, press

Erase

immediately after the two

short beeps, or while the message is
playing. The screen prompts:

Press

to erase the message.

—

Press

to exit without erasing.

Press

Stop

To erase messages all at once

Press

Erase

. The screen prompts

you to choose what kind of
messages you want to erase.

Press

to select erasing all voice messages (ALL

VOICE), all document messages (ALL DOC.), or all
messages—both voice and fax—(ALL MSG).

Press

Menu/Set

Press

to erase.

—

Press

to exit without erasing.

ERASE THIS MSG.?
1.YES 2.NO

ERASE ALL VOICE?
SELECT

↑

↓

& SET

Summary of Contents for FAX-T98
























































































































































Search results

Summary of Contents for FAX-T98

Reviews:

Related manuals for FAX-T98

Brands by name

Popular brands

Brother FAX-T98, User Manual

Search results

Summary of Contents for FAX-T98

Reviews:

Related manuals for FAX-T98

Brands by name

Popular brands