Brother FAX-8360P, Owner'S Manual

Page: 67 / 126

AD
VANCED F
AX USE
Remote Fax Options
57
Remote Commands
Follow the commands below to access features remotely. When you call the machine and enter your
Remote Access Code (the factory setting is
1 5 9 ), the system will signal you with two short
beeps to enter a remote control command.
Change Fax Forwarding Setting
Press 9 5
then to
Turn Fax Forwarding OFF —Press 1 .
Turn Fax Forwarding ON —Press
2
.
Program Fax Forward Number —Press 4 . Automatically turns Fax Forwarding ON .
Turn Fax Storage ON —Press 6 .
Turn Fax Storage OFF —Press 7 . (This is only possible if there are no faxes stored in the memory,
or if all faxes have been erased using Remote Control
9 6 3
).
Retrieve or Erase a Fax
Press 9 6
then to
Retrieve all faxes —Press 2 , then enter the number of remote fax machine and then press # # . After
the beep, hang up and wait.
Erase all fax messages —Press 3 . If the data stored in the memory has not been printed before, it
will be printed first and then erased.
Check the Receiving Status
Press 9 7
then Press
1
.
1 long beep —Received fax messages.
3 short beeps —No messages.
Change Receive Mode
Press 9 8
then for
TAD —Press 1 .
F/T (FAX/TEL)—Press
2
.
FAX —Press 3 .
Exit Remote Operation
Press
9 0