manualshive.com logo in svg

Brother FAX 2750, Owner'S Manual

Share
Download
Brother FAX 2750 Owner'S Manual Download Page 197

185

G L O S S A R Y

Glossary

Activity Report

  Lists information about the last 50 incoming and outgoing

faxes. TX means Transmit.  RX means Receive.

ADF (Automatic Document Feeder)

  Refers to the number of pages that

can be placed in the document feeder and fed one at a time automatically.

All Dial List

  A listing of names and numbers stored in One Touch and Speed

Dial memory, in numerical order.

Automatic E-Mail Printing

  Software application that automatically prints

incoming E-Mail messages. (Included with the optional Multi-Function
Link Pro software.)

automatic fax transmission

  Sending a fax without picking up the handset

or pressing Hook.

Automatic Redial  

A feature that enables your fax machine to redial the last

fax number if the original fax did not go through because the line was busy
or there was no answer.

Backup Print

  Sets your fax machine to print a copy of faxes that are received

and stored in memory.

beeper

  The sound the keys make when they are pressed, an error occurs, or a

document has been received or transmitted.

beeper volume

  Volume setting for the beep when you press a key or make an

error.

Broadcasting

  The ability to send the same fax message to more than one

location.

Call Back Message

  Allows you to send a fax and then leave a message for

the other party to call you back.

Call Reservation

  Allows you to send a fax and then at the end of

transmission, you can talk with the other party.

Caller ID

  A service purchased from the Telephone Company that lets you see

the number (or name) of the party calling you.

Call Waiting Caller ID (For FAX 2750 only)

  If you subscribe to this

service from the Telephone Company, your fax machine will show the
Caller ID of a second call while you are on the telephone.  You can switch
back and forth between two calls.

Summary of Contents for FAX 2750
















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands