Brother FAX-1020E User Manual Download | Manualshive

Page: 98 / 118

background image

91

Chapter 14

15

Do not attempt to service this product yourself, as opening or removing covers may expose you
to dangerous voltage points and/or other risks, and may void your warranty. Please refer all
servicing to our Authorized Service Personnel. A list of Authorized Service Centres has been
included for your convenience, or you may contact the Brother Dealer for Service.

16

This product has no mains ON/OFF switch. It is therefore highly important that access to the
mains plug and the mains socket to which the plug is connected, is never obstructed, in case for
some reason the mains power to the machine must be quickly disconnected.

17

Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel
under the following conditions:

◆

If the power cord is damaged or frayed.

◆

If the product has been spilled by liquid.

◆

If the product has been exposed to rain or water.

◆

If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.

◆

If the product has been dropped or the cabinet has been damaged.

◆

If the product exhibits a distinct change in performance, indicating a need for service.

18

To protect your product against power surges, we recommend the use of a power protection
device (Surge Protector).

19

We do not advise the use of an extension lead.

•

For protection against the risk of electrical shock, always disconnect all
cables from the wall outlet before servicing, modifying or installing the
equipment.

•

This equipment may not be used on coin service lines provided by the
telephone company or connected to party lines.

•

Brother cannot accept any financial or other responsibilities that may be
the result of your use of this information, including direct, special or
consequential damages. There are no warranties extended or granted by
this document.

«
...
96
97
98
99
100
...
»

Summary of Contents for FAX-1020E























































































































Reviews:

No comments

Related manuals for FAX-1020E

Brand: Janome Pages: 63

Brand: Singer Pages: 29

Brand: Bulldog Security Pages: 7

Brand: ELNA Pages: 230

Brand: Singer Pages: 12

MICROMAG 17'' DISK PAD ASSIST

Brand: RPS Pages: 38

Brand: PowerBoss Pages: 52

Brand: Singer Pages: 12

Brand: Tennant Pages: 6

SWEEPER VAC V-036

Brand: Vax Pages: 12

Brand: JUKI Pages: 14

Brand: Kettler Pages: 12

Brand: JUKI Pages: 187

Brand: Koblenz Pages: 4

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands