For additional help or other inquiries please contact our Brother Support Center
http://www.brother-usa.com/Support/
Call: 1-877-BROTHER (877-276-8437) M-F, 9:00am to 6:00pm Eastern Time
14
the standard mat. For best results, lightly press the scrapbook paper to the
standard mat; do not use a brayer or spatula. Gently remove the scrapbook
paper and cut designs off the mat immediately. If the paper continues to tear,
try using the low tack adhesive mat.
My mat is way too sticky; I am worried it will not let go of my paper and may rip
my design?
One suggestion made by Brother crafter Erin Bassett is to lightly press your mat
on a piece of clothing to reduce the initial tackiness, yet still, allow your mat to
remain tacky enough to be used for regular use.
How long will my mats last?
It depends on what each mat is used for and how often the mat is used. To help
preserve the longevity of your mat. Also, to prevent cutting through mats, we do
recommend that you always try a test cut before proceeding to cut out your
design. Tip: Start your testing at a lower setting. Especially with using the fabric
support sheet, you will want to test your blade to create a kiss cut (half cut). This
will cut out your desired surface, but not cut through your Fabric Support Sheet.
DesignNCut & ScanNCut:
What is the difference between DesignNCut and ScanNCut?
DesignNCut is a new member of our cutting machine family. The ScanNCut is a
standalone machine with the built-in scanner while the DesignNCut requires PC
