3-83
Confidential
9.12 PS/MJ Shield Unit (MJ PCB
*1
and Power Supply PCB)
*1 For MFC only
*2 For models with main PCB B57U082
(1) If the main PCB frame has not been removed, disconnect the power supply harness, MJ
(LINE) harness
*1
and MJ (EXT) harness
*1
from the main PCB, then remove two screws
"b" (shown on the previous page) from the main PCB frame.
(2) Remove the two screws shown below.
(3) Pull the ferrite core of the MJ (LINE) harness
*1
out of the core holder.
Note:
If the ferrite core is secured to the lower cover with a band instead of a core holder,
cut it off and release the MJ (LINE) harness.
(4) Release the power supply harness, MJ (LINE) harness
*1
and MJ (EXT) harness
*1
from the
cable guides on the lower cover.
(5) As shown below, press lock "x" on the PS/MJ shield unit to release it from pawl "y" on the
lower cover, then remove the PS/MJ shield unit from the bottom of the lower cover.
(3_076)
Screw, bind M3x6
Core holder
PS/MJ shield unit
Pawl "y"
Lock "x"
MJ (EXT) harness *
1
(black)
MJ (LINE) harness *
1
(yellow)
Ferrite core *
2
U-shaped cutout
Power supply harness
Lower cover
Lower cover
Lock "x"
Pawl "y" provided
on the lower cover
MJ (LINE) harness *
1
and its ferrite core
Summary of Contents for DCP-J925DW
