Brother DCP-J4110DW, Basic User'S Manual

Page: 59 / 123

Routine maintenance
51
A
Checking the print quality
A
If faded or streaked colours and text appear
on your printouts, some of the print head
nozzles may be clogged. You can check this
by printing the Print Quality Check Sheet and
looking at the nozzle check pattern.
a
Press (
Settings
).
NOTE
If is on the Touchscreen, you can
press it, and then go to step
e
.
b
Press
s
or
t
on the Touchpanel to
display
General Setup
.
c
Press
General Setup
.
d
Press
Ink
.
e
Press
Test Print
.
f
Press
Print Quality
.
g
Press
Start
.
The machine begins printing the Print
Quality Check Sheet.
h
Check the quality of the four colour
blocks on the sheet.
i
The Touchscreen asks you if the print
quality is OK.
Do one of the following:
 If all lines are clear and visible, press
Yes
to finish the Print Quality check
and go to step
m
.
 If you can see missing short lines as
shown below, press
No
.
j
The Touchscreen asks you if the print
quality is OK for black and then the three
colours.
Press
Yes
or
No
.
k
The Touchscreen asks you if you want
to start cleaning.
Press
Yes
.
The machine starts cleaning the print
head.
l
After the cleaning procedure is finished,
press
Start
.
The machine starts printing the Print
Quality Check Sheet again. Return to
step
h
.
m
Press .
NOTE
If you clean the print head at least five
times and the print has not improved, try
installing a new Genuine Brother Brand
replacement ink cartridge for each
problem colour. Try cleaning the print
head again up to five more times. If the
print has not improved, call Brother
customer service or your local Brother
dealer.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
OK Poor