Brother DCP-J1200W, Online User'S Manual, Page: 166 / 240

LED Status Cause Action
Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
See
Related Information : Clean the
Paper Pick-up Rollers .
Wrong paper
size The paper size setting does not match
the size of paper in the tray.
-
OR -
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
If you are printing from your
computer, make sure the paper
size you selected in the printer
driver or in the application you use
to print matches the size of paper
in the tray.
See
Related Information : Print
Settings (Windows) .
1. Check that the paper size you
chose in the machine matches
the size of the paper in the tray.
See
Related Information :
Change the Paper Size and
Paper Type
.
2. Make sure you loaded the
paper in a Portrait position, by
setting the paper guides at the
indicators for your paper size.
See
Related Information : Load
Paper .
3. After you have checked the
paper size and the paper
position, press
MONO COPY or
COLOUR COPY .
Cover open The ink cartridge cover is not locked in
the closed position. Firmly close the ink cartridge cover
until it locks into place.
Replace Ink One or more of the ink cartridges have
reached the end of their lives. The
machine will stop all print operations. Replace the ink cartridges.
See
Related Information : Replace
the Ink Cartridges .
• You can still scan even if the ink
is low or needs to be replaced.
No cartridge An ink cartridge is not installed
correctly. Remove the ink cartridge and re-
install it slowly and firmly until it
locks into place.
See
Related Information : Replace
the Ink Cartridges .
Monochrome
print only One or more of the colour ink
cartridges have reached the end of
their lives.
You can use the machine in
monochrome mode for approximately
four weeks depending on the number
of pages you print.
While
Power LED and Ink LED light
up, each operation works in the
following way:
•
Printing
If the media type is set to
Plain
Paper and you selected
Greyscale in the printer driver, you
can use the machine as a
monochrome printer.
Replace the ink cartridges.
See
Related Information : Replace
the Ink Cartridges .
Although the Cause column lists
options for using the machine after
this error appears, you will not be
able to use the machine until you
replace one or more of the ink
cartridges under the following
condition:
•
If you unplug the machine or
remove the ink cartridge.
161