Brother DCP-8110D Basic User'S Manual Download Page 32

Page: 32 / 136

How to load

documents

You can copy and scan from the ADF
(automatic document feeder) or the scanner
glass.

Using the automatic
document feeder (ADF)

The ADF can hold up to 35 pages (for
DCP-8110D and DCP-8110DN) or up to 50
pages (for DCP-8155DN) and feeds each
sheet individually. We recommend you use
standard 80 gsm paper and always fan the
pages before putting them in the ADF.

Document Sizes Supported

How to load documents

Important

• DO NOT leave thick documents on the

scanner glass. If you do this, the ADF may
jam.

• DO NOT use paper that is curled,

wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.

• DO NOT use cardboard, newspaper or

fabric.

• To avoid damaging your machine while

using the ADF, DO NOT pull on the
document while it is feeding.

Note

• To scan documents that are not suitable

for the ADF, see

Using the scanner glass

page 25.

• It is easier to use the ADF if you are

loading a multiple page document.

• Make sure documents with correction fluid

or written with ink are completely dry.

Unfold the ADF document support (1).
Lift up and unfold the ADF document
output support flap (2).

Fan the pages well.

Stagger the pages of your document

face up top edge first

, in the ADF until

the LCD display message changes and
you feel the top page touch the feed
rollers.

Loading documents

Length:

147.3 to 355.6 mm

Width:

147.3 to 215.9 mm

Weight:

64 to 90 gsm

Summary of Contents for DCP-8110D









































































































































Search results

Summary of Contents for DCP-8110D

Reviews:

Related manuals for DCP-8110D

Brands by name

Popular brands

Brother DCP-8110D, Basic User'S Manual

Search results

Summary of Contents for DCP-8110D

Reviews:

Related manuals for DCP-8110D

Brands by name

Popular brands