Brother DCP-8070D, User Manual

Page: 20 / 122

Loading paper and documents
13
2
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: thin paper, plain paper, thick paper,
bond paper, recycled paper, transparencies,
labels or envelopes.
For best results, follow the instructions below:
„ Use paper made for plain paper copying.
„ Use paper that is 60 to 105 g/m
2
.
„ Use labels and transparencies which are
designed for use in laser machines.
„ DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
„ For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
„ Avoid touching the printed surface of the
paper immediately after printing.
„ When you use transparencies remove
each sheet immediately to prevent
smudging or paper jams.
„
Use long grain paper with a neutral Ph
value, and a moisture content of approx.
5%.
Recommended paper and
print media
2
To get the best print quality, we suggest using
the following paper.
Type and size of paper
2
The machine loads paper from the installed
standard paper tray or multi-purpose tray.
Standard paper tray
2
Since the standard paper tray is a universal
type, you can use any of the paper sizes (one
paper type and size at a time) listed in the
table in
Paper capacity of the paper trays
on page 14. The standard paper tray can
hold up to 250 sheets of Letter/A4 size paper
(80 g/m
2
). Paper can be loaded up to the
maximum paper mark on the sliding paper
width guide.
Multi-purpose tray (MP tray)
2
The MP tray can hold up to 50 sheets of plain
paper (80 g/m
2
) or up to 3 envelopes. Paper
can be loaded up to the maximum paper mark
on the sliding paper width guide.
Paper Type Item
Plain paper
Xerox Premier TCF 80 g/m
2
Xerox Business 80 g/m
2
Recycled Paper
Xerox Recycled Supreme
80 g/m
2
Transparency 3M CG3300
Labels Avery laser label L7163
Envelope Antalis River series (DL)