Brother DCP-8020 Service Manual Download Page 43

Page: 43 / 353

MFC-8420/8820D/8820DN, DCP-8020/8025D/8025DN

SERVICE MANUAL

2-13

3.2.2

For Parallel Interface Cable Users (For Windows

95/98/98SE/Me/2000 Professional/XP)

(1) Switch off and unplug the machine from the AC outlet and disconnect it from your

computer, if you already connected an interface cable.

(2) Turn on your computer.

(For Windows

2000 Professional/XP, you must be logged on as the administrator.)

(3) Insert the supplied CD-ROM for the operating system you are using into your CD-ROM

drive. If the model name screen appears, select your machine. If the language screen
appears, select your language.

(4) The CD-ROM main menu will appear.

Click

Install Software

NOTE:

If this window does not appear, use Windows

Explore to run the

setup.exe

program from the

root directory of the Brother CD-ROM.

(5) Click

MFL-Pro Suite

in Main Application.

NOTE:

•

MFL-Pro Suite includes Printer Driver, Scanner Driver, ScanSoft

PaperPort

ScanSoft

Text Bridge

, PC-FAX software, Remote Setup and True Type fonts.

PaperPort

is a document management application for viewing scanned documents.

•

ScanSoft

TextBridge

, which is integrated into PaperPort

, is an OCR application that

converts an image into text and inserts it into your default word processor.

(6) Click

Install

NOTE:

•

If you see the following screen, click

to install the Windows

updates. After the

updates are installed your PC may restart.

•

If it does the installation will automatically continue.

•

If the installation does not continue automatically, please open the installer menu again by

double-clicking the

setup.exe

program from the root directory of the Brother CD-ROM,

and continue from step (4).

(7) When the PaperPort

8.0 SE Setup window is displayed, click

Next

(8) After reading and accepting the ScanSoft License Agreement, enter your user

information and click

Next

(9) Select Typical and click

Next

(10) Click

Install

and PaperPort

will start installing on your computer.

(11) When the ScanSoft Registration screen is displayed, make your selection and follow the

on- screen instructions.

(12) Click

Finish

to complete installation.

(13) When the Brother MFL-Pro Suite Installation window appears, click

Next

NOTE:

If an error message appears during the installation process, or if you have previously installed
the MFL-Pro Suite, you will first have to uninstall it. From the

Start

menu, select

Programs,

Brothe

Brother MFL-Pro Suite

Uninstall

, and then follow the instructions on the screen.

Summary of Contents for DCP-8020


































































































































































































































































































































































Search results

Summary of Contents for DCP-8020

Reviews:

Related manuals for DCP-8020

Brands by name

Popular brands

Brother DCP-8020, Service Manual

Search results

Summary of Contents for DCP-8020

Reviews:

Related manuals for DCP-8020

Brands by name

Popular brands