Brother DCP-8020, Service Manual

Page: 42 / 353

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-12
Brother Native driver Installation
(20) Click Start and select Printers and Faxes .
Click on Add a printer and the Add Printer Wizard will start.
When this screen appears, click Next .
(21) Un-check the Automatically detect and install my Plug and Play printer selection
and then click Next .
(22) Select USBXXX from the pull down window for the Printer Port Selection and then click
Next .
(23) Click on Have Disk .
(24) Browse the CD-ROM for the WXP folder.
Highlight the WXP folder and click Open .
Highlight the Addprt folder and click Open .
(25) Click Open .
(26) Make sure X:\WXP\Addprt is displayed in the window and click OK (X:\ is the drive your
CD-ROM).
(27) Highlight the model you are installing from the list of machines and click Next .
(28) The model you are installing will be listed in the window. Select Yes or No if you want
this driver to be your default printer.
(29) Select Do not share this printer and Next .
(30) Select Yes and Next to print a test page.
(31) When this screen appears, click Finish .
(32) When the Windows Logo testing screen appears, click Continue Anyway .
NOTE:
•
There will be two Brother printer drivers listed in the “Printers” selection.
•
The driver with Printer after the model name (ex. Brother MFC-8820D Printer) is the
Brother Native Driver.
OK:
The Brother Native Drivers have been installed and the installation is now complete.