manualshive.com logo in svg

Brother DCP 385C - Color Inkjet - All-in-One, Service Manual

The Brother DCP 385C is a versatile all-in-one color inkjet printer, ideal for home or small office use. With its easy-to-use interface, this device delivers high-quality prints, copies, and scans. To get the most out of your printer, download the free user manual from manualshive.com.

Share
Download
background image

9-27

Confidential

(7) Wait for the machine to automatically return to the initial stage of the maintenance mode

and show "**** Active" on the LCD.

Remove the external memory from the machine and keep it in a safe place.

NOTE:

 If any of the error messages listed below appears, press the 

Stop/Exit

 key, and the

machine returns to the initial stage of the maintenance mode.

„

Restoration Procedure

(1) Insert the external memory containing the backup data into the slot of the machine in the

initial stage of the maintenance mode.

The "**** Active" appears on the LCD.

NOTE:

 Do not insert more than one external memory at a time.

NOTE:

 If the serial number in the backup data stored in the external memory does not

match that of the machine, data restoration cannot be performed.

(2) Press the 

4

 and 

6

 keys in this order. For models without numerical keypad, enter 4 and 6 in

this order using the  ,   and 

OK

 keys.

The "Export to Card" appears on the LCD.

(3) Press the   or   key (

Scan

 or 

Copy

 key for models without   or   key) until the desired

item, any of the following, appears on the LCD.

"Import from Card" for restoring only user setting information

"Import all" for restoring all backup data including machine information

(4) Press the 

Black Start

 (

Mono Start

) key.

The "********.msd" appears on the LCD. The "********" is unique to each model.

(5) Press the 

Black Start

 (

Mono Start

) key.

The "Import from Card" or "Import all" appears again on the LCD.

(6) Press the 

Black Start

 (

Mono Start

) key.

The "Please wait" appears on the LCD.

NOTE:

 Never remove the external memory from the machine when the exporting is in

progress.

(7) Wait for the machine to automatically return to the initial stage of the maintenance mode

and show "**** Active" on the LCD.

Remove the external memory from the machine and place it in a safe place.

NOTE:

 If any of the error messages shown above appears, press the 

Stop/Exit

 key, and the

machine returns to the initial stage of the maintenance mode.

Error Message

Cause

Card is used

The external memory is being used by another operation.

Insert Card

No external memory is inserted.

No file

- No "BROTHER" folder in the external memory
- Invalid file name

Card Error

Failed to open the file.

Machine ID Error

Mismatch of serial numbers between the machine and the backup 
data (which is detected only in data restoration).

Write Error

Writing to an external memory failed due to insufficient capacity.

Summary of Contents for DCP 385C - Color Inkjet - All-in-One


















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DCP 385C - Color Inkjet - All-in-One

Canon IMAGERUNNER 2020 Specifications preview
IMAGERUNNER 2020
Brand: Canon Pages: 4
Xerox DocuColor 30 Supplementary Manual preview
DocuColor 30
Brand: Xerox Pages: 17
Xerox Document Centre ColorSeries 50 User Manual preview
Document Centre ColorSeries 50
Brand: Xerox Pages: 261

Brands by name

Popular brands

Load more brands