Brother DCP 385C - Color Inkjet - All-in-One User Manual Download

Page: 252 / 256

Remote Setup & PhotoCapture Center

244

PhotoCapture Center

You can access a USB Flash memory drive or a memory card installed in the machine from a Macintosh

CAUTION

DO NOT start your Macintosh

with a USB Flash memory drive or a memory card installed in the media

drive of the machine. You could lose your data or damage the media.

Note

• The PhotoCapture Center

will read only the media that was put in first.

• DCP-165C and MFC-290C do not support CompactFlash

• MFC-250C does not support CompactFlash

, Memory Stick™, Memory Stick PRO™, SecureDigital or

xD-Picture Card™.

• While the machine is printing from the PhotoCapture Center

, your Macintosh

cannot access the

PhotoCapture Center

for any other operation.

For USB cable users

Put a USB Flash memory drive, CompactFlash

® 1

, Memory Stick™

, Memory Stick PRO™

SecureDigital

or xD-Picture Card™

into your machine.

The

Removable Disk

icon appears on the Desktop.

This product also supports CompactFlash

type1.

MagicGate™ Memory Stick™ and Memory Stick PRO™ can be used, but any music data that is stored on the stick cannot be read.

This product supports SecureDigital High Capacity.

This product supports xD-Picture Card™ Type M / Type M

/ Type H (Large Capacity).

Note

If you create a name for the volume level of the USB Flash memory drive or memory card, the name
appears instead of “

Removable Disk

”.

Double-click the

Removable Disk

icon. The files and folders on the USB Flash memory drive or memory

card appear on your screen.

Summary of Contents for DCP 385C - Color Inkjet - All-in-One

































































































































































































































































Search results

Summary of Contents for DCP 385C - Color Inkjet - All-in-One

Reviews:

Related manuals for DCP 385C - Color Inkjet - All-in-One

Brands by name

Popular brands

Brother DCP 385C - Color Inkjet - All-in-One, User Manual

Search results

Summary of Contents for DCP 385C - Color Inkjet - All-in-One

Reviews:

Related manuals for DCP 385C - Color Inkjet - All-in-One

Brands by name

Popular brands