Brother DCP-2537DW Service Manual Download Page 10

Page: 10 / 340

vii

Confidential

SAFETY INFORMATION



Definitions of Warnings, Cautions, and Notes and Memos

The following conventions are used in this manual:

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result
in damage to property or loss of product functionality.

Prohibition icons indicate actions that must not be performed.

Electrical Hazard icons alert you to possible electrical Shock.

Fire hazard icons alert you to the possibility of a fire.

Hot Surface icons warn you not to touch product parts that are hot.

Note

NOTE specifies the operating environment, conditions for installation, or special
conditions of use.

Summary of Contents for DCP-2537DW





















































































































































































































































































































































Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands

Brother DCP-2537DW, Service Manual

Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands