Chapter 1
26
1.Setup
Receive
(In FAX mode
only)
(Continued)
6.Memory
Receive
Automatically stores
any incoming faxes in
its memory if it runs
out of paper.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
On
*
Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press
Start
.
Off
Further incoming
faxes will not be
stored in memory.
The machine will
then stop
automatically
answering calls until
fresh paper is put in
the paper tray. To
print the last fax you
received, put fresh
paper in the tray and
press
Start
.
7.Print
Density
You can adjust the
Print Density setting
to make your printed
pages darker or
lighter.
-
nnnno
+
-
nnnon
+
-
n
nonn
+
*
-
nonnn
+
-
onnnn
+
Press
c
to make
darker, press
d
to
make lighter.
2.Setup Send
1.Contrast
Changes the
lightness or darkness
of faxes you send.
Auto
*
Auto
will give the
best results. It
automatically
chooses a suitable
contrast for your
document.
Light
If your document is
too light, choose
Light
.
Dark
If your document is
too dark, choose
Dark
.
2.Fax (For MFC-1910W(E)) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
Page
The factory settings are shown in Bold with an asterisk.
