Brother DCP-1400, Owner'S Manual

Page: 48 / 147

6 - 2
F O R D O S U S E R S
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software to install the program:
Follow these steps to install the remote printer console program:
1
Make sure your Brother DCP is connected to your computer and is set to Online.
2
Start your computer and go to the DOS prompt. If you are in Windows
®
, exit
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x : (Substitute the drive letter of your CD-ROM
drive for “ x ”), and then press Enter.
5
Type CD DOS, and then press Enter.
6
Type RPCSETUP, and then press Enter.
7
Follow the instructions in the installer.
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
C:\> x :
x :\>CD DOS
x :\DOS>RPCSETUP