Brother DCP-115C Software User'S Manual Download Page 155

Page: 155 / 159

Remote Setup & PhotoCapture Center™

12 - 2

Note

• To save a setting, highlight the setting (for example, Set Quick-Dial) from the setting list then click

Export

Each setting you export is saved as a single file.

• If you need to change the machine that was registered to your Macintosh

during the installation of MFL-

Pro Suite (see

the Quick Setup Guide

), or if the network environment was changed, you need to specify

the new machine. Open the DeviceSelector and choose the new machine. (For network users only)

PhotoCapture Center™

You can access a Media Card put into the machine from a Macintosh

CAUTION

DO NOT start your Macintosh

with a media card put in the media drive of the machine. You could lose

your data or damage the card.

For USB cable users

Put a SmartMedia

, CompactFlash

® 1

, Memory Stick

® 2

, Memory Stick Pro™, MultiMediaCard™,

SecureDigital™ or xD-Picture Card™

into your machine.

This product also supports CompactFlash

type1 and xD-Picture Card™ type M (Large Capacity).

MagicGate Memory Stick

and Memory Stick Pro™ can be used, but any music data that is stored on the stick cannot be read.

Note

If you create a name for the volume level of the media card, the name appears instead of
‘

Removable Disk

’.

Double-click the

Removable Disk

icon. The files and folders on the media card appear on your screen.

Summary of Contents for DCP-115C
































































































































































Search results

Summary of Contents for DCP-115C

Reviews:

Related manuals for DCP-115C

Brands by name

Popular brands

Brother DCP-115C, Software User'S Manual

Search results

Summary of Contents for DCP-115C

Reviews:

Related manuals for DCP-115C

Brands by name

Popular brands