Editing Designs 53
Copying Segments
In the Pacesetter BES Monogramming Suite design workspace,
you can use the copy (or cut) method to place segments of your
design onto the computer’s clipboard. You can then use these
cut or copied design objects elsewhere in the design, by pasting
them back into the workspace, with the Paste command. This is
a way to quickly create a repeated motif.
To copy to the Clipboard:
1
Select one or more segments you want to copy.
2
To copy segments to the clipboard, complete the following:
In the clipboard area of the Home tab, click Copy.
In the design workspace, right-click the segment(s) and
choose Copy from the menu.
Press Ctrl+C on your keyboard
The segments will be copied, but not removed from their
original placement in the design.
To cut to the Clipboard:
1
Select one or more segments you want to cut.
2
To cut segments to the clipboard, complete the following:
In the clipboard area of the Home tab, click Cut.
In the design workspace, right-click the segment and
choose Cut from the menu.
Press Ctrl+X on your keyboard
The segments are removed from their placement.
To paste a design object into the current design:
•
Do one of the following:
In the clipboard area of the Home tab, click Paste.
Right-click, and choose Paste from the context menu.
Press Ctrl+V on your keyboard.
The object you cut or copied will be pasted into your design.
When you paste an object into the design, it will be placed at
the end of the sequence, and therefore will sew out last. The
pasted segment (or segments) can be re-ordered in the
Sequence View.
