2. SPECIFICATIONS
KE-430D, BE-438D
10
Sewing size (mm)
No.
No. of
button holes
Sewing
pattern
No. of
threads
No. of
crossover
stitches
No. of
stitches
X Y
*2
21
6-6 1
19
*2
34
10-10 1 27
*2 *3
22
6-6 0
24
*2 *4
43
6-6 0
24
*2 *3
35
10-10 0 32
*2 *4
44
10-10 0 32
2.4 3.4
46 6-6
1
19
47 8-8
1
23
48 10-10
1
27
49
4
12-12 1 31
3.4 3.4
*2 Do not use the button lifter spring.
*3 When sewing of one side is completed, the button clamp rises and the thread is trimmed. To finish sewing, press the foot
switch until sewing of the other side starts, or press the foot switch again after sewing of the other side is completed.
*4 When sewing of one side is completed, the thread will be trimmed without the button clamp rising, and then the other
side will be sewn.
For shank button
Sewing size (mm)
No.
Sewing pattern
No. of threads
No. of
stitches
X Y
50 6
12
51 8
14
52 10
16
53
12 18
3.4 0
Note when creating additional data (program nos. 200 - 999)
When sewing data with a small number of stitches (15 stitches or less) is sewn repeatedly (short cycle operation), the
upper shaft motor may overheat and the “E150” error code may be generated.
