manualshive.com logo in svg

Brother BAS-342G PS, Instruction Manual, Page: 41 / 86

Share
Download
Brother BAS-342G PS Instruction Manual Download Page 41

6. USING THE OPERATION PANEL (BASIC OPERATIONS) 

 

BAS-342G PS 

32

6-7. Setting the height of the intermittent presser foot 

You can use the operation panel to change the setting value for the intermittent presser foot height.

 

1 

 
 
 
 
 
 
 
 
 
 
 
 

THREAD/CLAMP indicator illuminates

MENU indicator switches off

Press the THREAD/CLAMP key.

 

The sewing machine will switch to threading mode.

 

•

 " 1" will appear in the PROGRAM No. display and the 

intermittent presser foot (1) will drop. 

 

2 

 
 
 
 
 
 
 
 
 

Press the   key. 
The sewing machine will switch to intermittent presser foot height 
setting mode.

 

•

 " 4" will appear in the PROGRAM No. display and the 

intermittent presser foot (1) will rise to the setting value that 
appears in the menu display.     
(Intermittent presser foot height setting: 0.0 

−

 10.0) 

Press the 

 

or

 

 

key to set the intermittent presser foot 

height.

 

•

  The intermittent presser foot (1) will be raised or lowered to the 

height of the new value that has been set. 

NOTE: 

After making the setting, be sure to turn the pulley once by 
hand and check that the intermittent presser foot (1) does not 
touch the needle bar.

 

 

 

<Changing modes>

 

 

 
"   1" Threading mode

 

↑

 

↓

 

"   4"

 

Intermittent presser foot height setting mode

 

 

3 

Ending setting mode

 

 
 
 
 

THREAD/CLAMP indicator switches off 

Press the THREAD/CLAMP key.

 

•

  The setting values will be memorized. 

•

  The intermittent presser foot (1) will return to the status that it 

was at before the sewing machine was switched to setting 
mode. 

 

 

Intermittent presser foot operation 

 

 

1

 

Intermittent presser foot lift amount

 

2

 

Intermittent presser foot height 

The settings can be made by the above 
operations. 
However, if the intermittent presser foot 
height is set to a smaller setting than the 
intermittent presser foot stroke, the 
intermittent presser foot will not drop in 
order to prevent it from coming into contact 
with the needle plate. (Refer to page 64.)

 

3

 

Intermittent stroke 

Refer to "11-13. Changing the intermittent 
stroke" when making the adjustment.

 

 

All indicators switch off 

5225Q

During standby 

When lowered 

While sewing 

4445Q 2158B

4016M

2763B

Summary of Contents for BAS-342G PS























































































Reviews:

No comments