7. STANDARD ADJUSTMENTS
47
BAS-341H, BAS-342H
7-16. Adjusting the work clamp lift amount
The maximum lift amount for the work clamp (2) is 30 mm above the top of the needle plate.
1.
Turn on the air, and then depress the work clamp switch (1) to raise the work clamp (2).
2.
Loosen the two bolts (4) of the work clamp lifter lever (3), and move the work clamp lifter lever (3) up or down to adjust.
7-17. Adjusting the air pressure
Lift up the handle (2) of the regulator (1) and then turn it to
adjust the air pressure to 0.5 MPa
After adjustment is complete, push the handle (2) downward
to lock it.
5018Q
4052M
Max. 30mm
2565B
