Brother ArtCity140 Service Manual Download Page 58

Page: 58 / 151

Basic of Assembly

2 - 46

Main frame and Covers

Basic of

Assembly

Basic of

Assembly

Attachment of Face plate assy and Front cover assy

1. Set the front cover assy to the rear cover assy, and hang the five hooks of front cover assy on the five

hook trays of rear cover assy.

2. Secure the front cover assy to the arm bed with the three screws (taptite, cup P M4X20) and the screw

(taptite, bind P M3X16) from the rear cover side. And tighten the screw (screw, pan (S/P washer)
M3X6) to the front cover side.

3. Attach the pattern selecting dial to the shaft of pattern selecting unit assy.

4. Insert the pin of face plate assy into the positioning hole of front cover assy, and set the face plate assy

to the rear cover assy, and secure it with the screw (taptite, cup P M4X20) from the rear cover side.

→

Refer to 3 - 60 Assembly of Face plate assy.

Taptite, Cup P M4X20

Screw, Pan (S/P washer) M3X6

Taptite, Bind P M3X16

Taptite, cup P M4X20

Taptite, bind P M3X16

Taptite, cup P
M4X20

Hook tray

Hook trays

Face plate assy

Front cover assy

Pattern
selecting dial

Taptite, cup P M4X20
(Face plate assy)

Taptite, bind P
M3X16

Screw, pan (S/P washer) M3X6

Hooks

Hook trays

Shaft of pattern
selecting unit assy

Rear cover assy

Positioning hole

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands