The Li-ion Rechargeable Battery
Important notes on charging and using the Li-ion
Rechargeable Battery
• Make sure to charge the Li-ion battery fully before using the
AiRScouter.
• The Li-ion battery is designed to be charged and used within specific
ranges of environmental conditions. The Li-ion rechargeable battery
included with the AiRScouter can only be charged in an environment
between 10 °C and 33 °C. If you attempt to charge the battery at
higher temperatures, the external power LED will flash rapidly and the
battery will not charge.
Characteristics of the Li-ion Rechargeable Battery
When you know the characteristics of the Li-ion rechargeable battery,
you are able to use the Li-ion rechargeable battery provided with the
product correctly.
• Using or storing the Li-ion rechargeable battery in places that are too
hot or cold may cause it to deteriorate more quickly. In particular,
usage at a high charge rate (90% or more) in a hot place greatly
accelerates the deterioration of the Li-ion rechargeable battery.
• If this product will not be used for a month or more, take the Li-ion
rechargeable battery out of the control box, and store it in a cool place
out of direct sunlight.
• Charge the Li-ion rechargeable battery every six months if it is left
unused for a long period.
• The device may feel warmer if it is touched while the Li-ion battery
is charging. This is normal, and the device can be used safely.
Stop using the device if the control box gets extremely hot.
Inserting the Li-ion Rechargeable Battery into the
Control Box
If the Li-ion rechargeable battery was removed, perform the steps listed
above in reverse to insert it again.
How to charge the Li-ion Rechargeable Battery
The Li-ion rechargeable battery can be charged only by using the
included AC adapter. To charge the battery, follow these steps:
1.
Power off the control box (note that the battery will not charge while the
AiRScouter is in use).
2.
Plug the included AC adapter into a compatible socket.
3.
Connect the AC adapter to the AC adapter port on the control box.
Stopping the charging of the Li-ion Rechargeable Battery
To stop the Li-ion rechargeable battery charging, unplug the cable from
the AC adapter.
Requesting repairs
If that does not solve the problem, note the following information and
contact your Brother dealer:
• Your AiRScouter's serial number
• Problem symptoms
• Problem context (for example, what you did and what you expected to
happen)
• Problem occurrence frequency (for example, always or intermittently)
Part retention period:
The minimum part retention time of functional parts for repair of this
product is five years from the end of manufacturing (two years for printed
materials).
For FAQs, troubleshooting and more, visit the Brother Solutions Center
Appendix
Note
It takes about three hours to fully charge the Li-ion rechargeable battery
when it is completely discharged.
Charging
Fully charged
(Slowly flashing
in orange)
(Off)
Before requesting repairs make sure you have performed the tasks listed in
section.
D00VM8001
