67
4
Chapter 4
SCANNING FUNCTIONS
A printed image (paper/sticker), stamped paper or an
original hand-drawn illustration can be scanned and
its outline can be cut out or drawn. This is useful for
scanning images for paper crafts, then cutting them
out.
Tutorial 4 - Scanning and Cutting
In this tutorial, we will scan an illustration drawn on
paper, then cut around it.
■
Preparation
a
Prepare the original.
When using the “Direct Cut” mode, use originals like
those described below.
• Patterns that are clearly drawn, with no gradation,
fading or blurriness
• Not using an extremely intricate design
b
Press
to turn on the machine.
• For details, see “Turning On/Off the Machine” on
c
Install the cutting blade holder into the carriage
of the machine.
• For details, see “Installing and Uninstalling the
■
Scanning
Depending on the color of the illustration, it can be
scanned in grayscale or color recognition mode.
a
Touch the “Scan” key in the home screen to
select the scanning mode.
b
Select “Direct Cut” in the scanning mode
selection screen.
A message appears.
c
In the selection screen for the cutting data
destination, touch
.
SCANNING FOR CUTTING (Direct Cut)
