Care and Maintenance
177
5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Grasp both sides of the needle plate cover, and
then slide it toward you.
a
Needle plate cover
X
The needle plate cover is removed.
f
Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
a
Bobbin case
g
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and
bobbin thread sensor and their surrounding
area.
a
Cleaning brush
b
Race
c
Bobbin thread sensor
Note
z
Do not apply oil to the bobbin case.
z
If lint or dust collects on the bobbin thread
sensor, the sensor may not operate correctly.
h
Insert the bobbin case so that the
U
mark on
the bobbin case aligns with the
{
mark on the
race.
• Align the
U
and
{
marks.
a
U
mark
b
{
mark
c
Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
i
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
a
Needle plate cover
CAUTION
a
a
a
b
c
a
b
●
Never use a bobbin case that is scratched.
Otherwise, the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
bobbin case (part code: XE7560-001
(green marking)), contact your nearest
authorized service center.
●
Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a
b
c
a
Summary of Contents for 885-V95
Page 2: ......
Page 50: ...48 GETTING READY ...
