Brother 1670N - B/W Laser Printer User Manual Download Page 97

Page: 97 / 235

CHAPTER 3 CONTROL PANEL

3-17

Printer Status Messages

The following table shows the printer status messages that are displayed
during normal operation:

Printer Status Message

Meaning

READY

Ready to print.

PROCESSING

Busy processing data.

SLEEP

In sleep status (power save mode).

PRINTING

Printing.

SELF TEST

Performing self-diagnostics.

PAUSE

The printer has suspended feeding forms.
Pressing the

switch resumes form feed.

NOW INITIALIZING

The printer is setting up.

WARMING UP

The printer is warming up.

MEMORY SIZE=XX MB

This printer has XX MB memory.

JOB CANCELLING

Cancelling the job.

RESOLUTION ADAPT

Printing with reduced resolution.

PRESS SET TO PRINT

Press the

Set

switch to start printing.

RESET TO FACTORY
SETTING

The printer setting returns to the factory
setting.

Summary of Contents for 1670N - B/W Laser Printer












































































































































































































































Search results

Summary of Contents for 1670N - B/W Laser Printer

Reviews:

Brother 1670N - B/W Laser Printer, User Manual, Page: 97 / 235

Search results

Summary of Contents for 1670N - B/W Laser Printer

Reviews: