manualshive.com logo in svg

Brother 1670N - B/W Laser Printer, User Manual, Page: 227 / 235

Share
Download
Brother 1670N - B/W Laser Printer User Manual Download Page 227

Appendix–26

FDA Regulations (For 100-120 V Model Only)

U.S. Food and Drug Administration (FDA) has implemented regulations for laser
products manufactured on and after August 2, 1976. Compliance is mandatory for
products marketed in the United States. One of the following labels on the back of
the printer indicates compliance with the FDA regulations and must be attached to
laser products marketed in the United States.

MANUFACTURED:
Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory
Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J

MANUFACTURED:
BROTHER INDUSTRIES LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J

 Warning

Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.

Summary of Contents for 1670N - B/W Laser Printer












































































































































































































































Reviews:

No comments