cannot be taken.
10. CLEANING
CLEANING THE WAVEGUIDE: the thermometer
waveguide (see fig. 1) is very delicate. Therefore, when the
thermometer is not being used, we recommend that you
always keep the cap on. However, if you need to remove
dust or dirt from the waveguide or sensor at its base, use a
cotton swab that has been slightly dampened with alcohol.
Remove all dirt and make certain that nothing accumulates
at the bottom of the waveguide where the sensor is
located. Do not use any other objects or liquids as the
surface of the sensor could easily be scratched or
damaged. Never let any excess liquid penetrate into the
waveguide and sensor.
CLEANING THE THERMOMETER BODY: use a soft cloth
dampened with soap and water and possibly re-wipe with a
sodium hypochlorite disinfectant.
DO NOT USE the thermometer for at least 30 minutes
after cleaning.
11. REPLACING the BATTERIES
• Set your thumb in the oval hollow on the back of the unit,
press down and slide the battery cover out (see fig 10).
• Remove the battery cover.
• Remove the old batteries and dispose of them in an
environmentally friendly way.
• Insert 4 new AAA - LR03 batteries, preferably alkaline,
carefully ensuring they are inserted correctly.
• To close the cover, slide it in the opposite direction from
which it was opened. After changing the batteries, let the
thermometer stabilise for 20 minutes before taking a
temperature reading, or run an MQCS (see no.6).
• Remove the batteries if you do not expect to use the
thermometer for a long time.
GUARANTEE
This product has a one year guarantee. Brother Max Ltd
will deem goods to be faulty if they are received damaged,
or where a manufacturing fault occurs within a year of
purchase. If the product is damaged as a result of defective
or run-down batteries or general wear and tear or improper
use, it will not be considered to be faulty. The warranty is
also void if:
- the label on the back bearing the serial number is
removed, damaged or rendered illegible.
- the product is opened or repaired by unauthorised
person(s).
- the product has been damaged due to non-compliance
with the instructions given in this manual.
If you believe your Brother Max product to be faulty within
12 months of purchase, please contact the retailer, from
where you purchased it, or failing a satisfactory response,
please contact our Customer Services Department. Your
local statutory rights are not affected. In the case of a valid
manufacturing defect, the product will be either repaired or
replaced, as agreed by Brother Max or your retailer, at their
sole discretion.
