Introduction
May we take this opportunity to thank you for choosing one of our stoves.
These appliances are designed to burn wood logs and wood derived fuels. It is essential
that your wood has been seasoned to ensure that it is sufficiently dry for burning. You can
determine the moisture content of your logs by using a digital moisture meter, your logs
need to be below 20% moisture content before they are considered dry enough for
burning.
Never burn wood that contains paint, glue or any other chemicals
See the section “Lighting the Stove” for further details. After reading this document, if there
is anything you are unsure about, please contact your dealer or our Technical Support
Department.
These instructions cover the basic principles to ensure the satisfactory installation of the
stove, although detail may need slight modification to suit particular local site conditions. In
all cases the installation must comply with current Building Regulations, Local Authority
By-laws and other specifications or regulations as they affect the installation of the stove.
Please note that it is a requirement under the Broseley Fires warranty system that
the installation of the stove is carried out by a Competent Person registered with a
Government approved Competent Persons Scheme. HETAS Ltd operate such a
Scheme and a listing of their Registered Competent Persons can be found on their
website at
www.hetas.co.uk
.
Packing List
1x Steel Bodied Stove
1x Spigot
1x Rear Firebrick (5 kW)
2x Rear Firebrick (7 kW)
2x Side Firebricks
1x Grate
1x Instruction Booklet
3x Lower Firebricks (surrounding the grate)
1x Steel Ash Pan
All parts will be inside the main stove body upon delivery. The spigot may be bolted to the
outside of the stove body.
GB12A Issue 2
3
