Endure Balanced Flue
3
Introduction
THANK YOU FOR PURCHASING A BROSELEY GAS STOVE
Broseley Fires Ltd, was founded as an appliance and design development company in
1975.
Since then we have built up an enviable reputation for the quality, reliability and fuel
efficiency of our stoves.
These instructions have been carefully prepared to guide the installer and end-user
through the relevant methods and standards for installation of your new Gas Stove.
Correctly installed and operated, your stove will give you many years of warmth and
reliability. Therefore, we would suggest that you read the whole instruction manual prior
to handing it to your installer. That way you will have a clearer picture of what is involved.
It is required by law that the complete assembly, installation and commissioning of gas
stoves is carried out by a professionally qualified and accredited gas fitter listed on the
“Gas Safe”
register.
THE INSTALLATION MUST BE IN ACCORDANCE WITH THE ‘GAS SAFETY
INSTALLATION AND USE REGULATIONS’ IN CONJUNCTION WITH THESE
INSTRUCTIONS AND THE RELEVANT ‘BRITISH STANDARDS CODES OF
PRACTICE’ REQUIREMENTS AND THE RELEVANT ‘LOCAL AND NATIONAL
BUILDING REGULATIONS’. A COMMISSIONING CERTIFICATE MUST BE LEFT
WITH THE END CUSTOMER UPON FINAL COMPLETION AND THE
COMMISSIONING FORM COMPLETED IN THE BACK OF THESE INSTRUCTIONS.
Packing List
Burner Box
Stove Box
1 x Burner Assembly
1 x Steel Stove Body
1 x Flue Pipe (including Terminal)
1 x Burner Bracket
1 x Pressure Test Elbow
1 x Banking Disc
1 x Wall Plate
1 x Transit Bracket
1 x Terminal Guard
1 x Ceramic Set
(inside the Burner Assembly)
1 x Steel Top Cover
1 x Steel Fret
2 x Magnets
(small)
1 x Cardboard Flue Template
6 x Self tapping screws
Please note the burner box will also contain additional magnets, dowels, fixings, tape
and wire which are not required for the Endure (these items are used when fitting the
product as its Inset variant the “Invictor”). These items may be discarded.
Chimney closure plates are not supplied
