Endure Balanced Flue
17
Assembly – Fitting the Stove Body
The next step is attaching the stove
body to the burner bracket.
Carefully position the stove body over
the burner and bracket assembly and
attach using the two front bolts (inc
nuts and washers) that were removed
in step 1 of the product assembly.
Place the Steel fret into position at the base of
the stove body, the fret is free standing as it
will need to be removed to gain access to the
controls which operate the appliance. Once
the appliance has been lit the fret can be
replaced. A blanking disc is provided and will
sit loosely on the top of the stove to conceal
the bracket fixings. Alternatively a dummy flue
spigot can be provided as an option to enable
a dummy flue pipe to be connected
– not
supplied as standard. To attach the dummy
spigot, use the three bolts provided (two of
which are actually the bracket bolts).
Blanking Disc
