4
Important Safety Advice
WARNING:
In order to avoid overheating do not cover the heater.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to circuit that is regularly switched on and off by utility.
If the supply cord is damaged, it must be replaced by the manufacturer, its ser-
vice agent or a similarly qualified person in order to avoid a hazard.
Use the heater in a well-ventilated area. Do not insert or allow objects to enter any
ventilation or exhaust opening. To prevent a possible fire, do not block air intakes
or exhaust openings in any manner. Do not use on soft surfaces, like a bed,
where openings may become blocked.
Do not place this heater near flammable materials, surfaces or substances, as
there may be a risk of fire. Keep the above flammable materials, surfaces or
substances at least 1m from the front of the product and keep them away from the
sides and rear.
• This heater must not be located immediately below a fixed socket outlet
or connection box.
•
DO NOT COVER
this heater, or obstruct the air inlet or
outlet, otherwise there is a risk of overheating.
•
During normal operation this appliance will emit
noise from the internal fan unit.
•
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
•
Children shall not play with the appliance.