13 |
EN
Brose Display Allround E41230
//
Assembly and adjustment
Assembly and adjustment
WARNING
Risk of accidents and injury!
Incorrect or improper assembly and
maintenance work can damage
your e-bike or the components and
increase the risk of accidents.
»
Do not overestimate your technical
abilities.
»
Have assembly and maintenance
work, in particular the replacement of
components and spare parts, carried
out only by an authorized Brose
specialist dealer.
»
Do not under any circumstances
carry out any work or make any
changes to your e-bike or the
components if you do not have the
necessary expertise and required
tools.
»
Always switch off the Brose Drive
System and remove the battery
before starting work.
»
Make sure that you can safely operate
the controls on the handlebars at all
times.
NOTE
Risk of damage!
Improper handling can cause
damage to the control unit.
»
Never twist the fixed control unit.
Always loosen the grub screw before
turning the control unit to adjust it.
INFORMATION
·The control unit can be mounted
on either the left or right side of the
handlebar.
·Brose recommends positioning on
the left-hand side of the handlebar.
