background image

3. Do not use any abrasive cleaner or harsh detergent as this can 
damage the surface of the furniture.
4. Avoid using spray polishes as they contain silicones which may spoil 
the furniture’s surface.
5. Make sure all surfaces are protected from heat and liquids by mats 
and coasters.
6. Ensure a mat or pad is placed under paper when you are writing on 
the furniture surface.
7. Do not place rubber, cork, vinyl or plastic materials on the wood 
finish as chemicals within may react with the finish if left in contact for 
an extended period of time.
8. Our furniture will endure most domestic conditions, but it is best to 
avoid placing furniture next to heat sources such as radiators or open 
flames. Severe or sudden changes in temperature and humidity can 
cause warping, cracking or splitting.
9. Excessive exposure to sunlight can cause discolouration. 
10. Avoid exposing your furniture to any liquid. All liquids should be 
wiped up immediately, with a soft, slightly damp cloth, in the direction 
of the wood grain. If sticky liquid residues remain, they may be 
removed with a dilute solution of warm soapy water followed by a 
clean, damp sponge. The area should then be wiped immediately, in 
the direction of the wood grain, with a clean, soft white cloth until 
completely dry.
11. Nail polish remover, hairspray, perfume, potpourri and any other 
products that contains solvents can damage wood finishes.
12. Re-tighten screws and attachments if they loosen.

Summary of Contents for Leonie Desk















Reviews: