Brooktrout PCI Analog Fax Linecard Installation and Replacement
EN/LZT 108 5829/6 R2A
May 2002 Ericsson Enterprise AB
7
To install Brooktrout PCI analog fax cards:
1. Determine the channels each fax card will handle.
2. Select a PCI expansion slot.
3. Insert the card’s edge connector into the bus slot. Apply pressure only to the top edge of
the board, and gently rock the card forward and backward to seat the edge connector into
the slot.
4. Install the retaining screw.
5. Repeat steps 1–4 for each fax card.
6. After you have installed all fax cards, replace the cover on the platform.
7. Re-attach the power cord to the platform.
If the PCI fax card…
Then…
Replaces an existing fax card
Remove the existing fax card from the PCI
expansion slot.
Adds fax ports to the system
If possible, select an empty PCI expansion slot that
will be assigned IRQ 10. If you want to assign
channel 0 to this fax card, be sure to select an
expansion slot that will be assigned the lowest
memory address range. Remove the slot’s retaining
screw and access cover plate.
