background image

Microsoft and Windows are registered trademarks of Microsoft Corporation. Brooktrout is a trademark of Brooktrout Technology, Inc. Intel 
and Dialogic are registered trademarks of Intel Corporation.
All other products, brand names, or companies mentioned in this document may be trademarks or registered trademarks of their respective 
companies.
EN/LZT 108 5829/6 R2A 

 

May 2002 Ericsson Enterprise AB

Before You Begin ........................................................................................................ 2

Gathering Tools and Equipment .............................................................................. 3

Installation Requirements .......................................................................................... 4

Preparing for Service.................................................................................................. 5

Installing Brooktrout PCI Analog Fax Cards in the Platform ............................. 6

Connecting Brooktrout PCI Analog Fax Cards 
to Loop Start Telephone Service ............................................................................. 8

Installing an External Power Supply for DID Service .......................................... 9

Connecting Brooktrout PCI Analog Fax Cards to DID Telephone Service .10

Installing or Configuring Fax Card Drivers in RightFax.....................................11

Troubleshooting RightFax Fax Server Problems ................................................12

This document explains how to install or replace Brooktrout

 TR114+P2L, TR114+P4C, 

TR114+P4D, and TR114+P4L PCI analog fax cards in a OneBox

®

 fax server platform. We 

recommend that you read this document in its entirety before disassembling the hardware.

IMPORTANT

Consider the following issues when installing these PCI analog fax cards:

Because Ericsson sells Brooktrout PCI analog fax cards as a kit to be 
installed in a computer platform that you provide, we cannot 
guarantee the compatibility of these cards in a computer platform that 
we have not tested. Hardware conflicts and configuration issues can 
occur between hardware devices installed in a computer platform. 
Ericsson will offer troubleshooting advice and assistance to the best 
of its knowledge and ability. However, you are ultimately responsible 
for resolving all hardware conflicts and configuration issues.

Brooktrout PCI analog fax cards are 

not

 approved for use in a 

platform containing Brooktrout ISA fax cards. If Brooktrout ISA fax 
cards are currently installed in the platform, they must be removed 
prior to installing the Brooktrout PCI analog fax cards. Brooktrout PCI 
fax cards are approved for use with all Intel

®

 Dialogic

®

 linecards 

supported by OneBox.

Brooktrout PCI analog fax cards are approved for use with RightFax 
version 6.0 or later only.

SPAR E PARTS DOCU M E NT

Brooktrout PCI
Analog Fax Linecard
Installation and Replacement

Summary of Contents for TR114+P2L













Reviews: