10
11
SELECTING MASSAGE OPTIONS
Press AUTO to select one of four
automatic programs. See Page 12 for a
description of automatic programs.
Manual Massage Controls:
• Press SHIATSU, TAPPING or ROLLING
to begin a specific massage type. See
Page 12 for a description of manual
massage options.
• Press TARGET to activate the spot
massage feature. A spot massage
targets a single area, focusing your
Shiatsu or Tapping massage on the
current roller location. Press TARGET
again to turn off the spot massage
feature.
• Press ADJUST to change the roller
width during a Rolling massage. Press
repeatedly to select the desired width
for the rolling action.
Press ZONE to select the area of your
body to be massaged - FULL body,
UPPER body, or LOWER body.
Press and hold RECLINE or CHAIR UP to
select the chair position, or press ROCK
for a gentle rocking motion.
Press HEAT to turn on or turn off the
Heat feature in your lumbar (lower back)
area. Can be used in both Automatic and
Manual massages.
Press the ON/OFF switch once to enter
stand-by mode. When remote is plugged
in, the power button will have a steady
blink signifying stand-by mode. After
massage begins, press again to stop the
current massage function and return to
stand-by mode.
OPERATING THE MASSAGE CHAIR
Starting a Massage Session
Before operating the massage chair, review the warnings beginning on
Page 2.
1. Ensure that the main power switch, located on the back of
the chair, is in the Off ( O ) position.
2. Plug the massage chair into an appropriate outlet. See Page 5 for
information on appropriately grounded outlets.
3. Click the main power switch, located on the back of the chair,
to the On ( | ) position.
4. Press the On/Off button on the controller. A beep will sound,
and the chair will enter stand-by mode, with the leg rest
slightly elevated.
5. Press AUTO to select an automatic program (described on Page 12) or
press SHIATSU, TAPPING, or ROLLING to manually select a massage
style (described on Page 12).
6. Optionally, select a ZONE to target your FULL body (shoulders to thighs),
UPPER body (shoulders and back) or LOWER body (seat and thighs).
7. Optionally, select a chair position. Press and hold the RECLINE button
to move into a reclined position. Press and hold the CHAIR UP button to
move into an upright position. Press ROCK for a gentle rocking motion,
from recline to upright, which repeats10 times.
8. Optionally, reposition the headrest, as described on Page 13.
9. During a Manual SHIATSU or TAPPING massage, optionally press
TARGET for a spot massage.
10. Press HEAT to turn the heat feature on or off during Automatic or Manual
massage.
Each massage session should not exceed 20 minutes. Targeted
massage should not exceed 5 minutes on any one area.
In an emergency or if there is any malfunction, press the ON/
OFF switch on the controller to stop the massage, then click the
main power switch on the back of the chair to the OFF position.
