background image

SAVE THESE INSTRUCTIONS

Use heated surfaces carefully. May cause serious burns. Do not use over 

sensitive skin areas or in the presence of poor circulation. The unattended use 

of heat by children or incapacitated persons may be dangerous.

This massage chair is intended for household use only.

1.  Instances when the chair should not be used

      In the following events, please turn off the main power switch immediately and
      disconnect the power cord from the electrical outlet:
      •  If water is accidentally spilled onto the chair.  This may result in electric shock
         or malfunction.
      •  If the fabric of the backrest is torn and the internal components are exposed.
      •  If pain or discomfort is felt during massage, stop operation immediately and 
         consult your doctor.
      •  If you detect any malfunction or any other abnormal condition during 
         operation.
      •  If there is a power failure. Injury may occur when power is restored 
         unexpectedly.
      •  If there is lightning.

2.  Assembly and repair of the chair

      •  Do not disassemble the backrest cover of the chair.  Touching the internal 
         components may result in malfunction or electric shock.
      •  The chair must only be professionally serviced or repaired.  Do not attempt 
         to disassemble or repair the chair yourself.

3.  Things to note about the power plug and cord

      •  Check that the Alternating Current (AC) voltage corresponds with the    
         specification indicated for the chair.
      •  Do not connect or disconnect the power plug from the electrical outlet with 
         wet hands. This may result in malfunction or electric shock.
      •  When disconnecting the power plug, pull it by holding the plug, not the cord.
      •  Although operation will be stopped automatically by the Auto-Timer function, 
         always remember to turn off the main power switch after use.
      •  Do not place the power cord under the chair or any other heavy objects.
      •  Do not wind the power cord around the chair as this may damage the cord 
         and result in a fire or electric shock.
      •  Do not operate chair with a damaged cord or extension cord.
      •  Do not use the chair if the electrical outlet is loose.
      •  If the power cord is damaged, it should be replaced by a qualified technician.

5

Summary of Contents for Recover 3D





























Reviews: