Sitting on the Brookstone Recover
TM
3D Massage Chair
How to recline the backrest
Raising and lowering the foot rest
Foot rest extension and retraction
To use the heat function
Preparation Before Use
• The rollers are usually stored in the
upper part of the backrest. This
position is known as the “home”
position.
• If the rollers are not in the home
position, reset by pressing the
power button on the controller
on and off again before sitting on
the massage chair.
• To recline the backrest, push and
hold the
▼
(Recline button) until the
backrest is at your desired angle.
• To raise the backrest, push and
hold the
▲
(Incline button) until the
backrest is at your desired angle.
The foot rest can be raised independently
for additional benefit.
• To raise the foot rest, press and hold
the foot rest button
▲
until the foot
rest is at the desired angle.
• To lower the foot rest, press and hold
the foot rest button
▼
until the foot
rest is at the desired angle.
• Raise the foot rest until your feet are
placed at a natural position.
• Stretch your feet to a comfortable
position. The foot rest will retract
or extend and stop at an
appropriate position.
• Press heat button to turn on/off
the heat function.
One touch to Zero Gravity
• Simply press the Zero Gravity
button once to recline to Zero
Gravity position. Press again to return
from Zero Gravity.
14
Summary of Contents for Recover 3D
Page 1: ...RecoverTM 3D Massage Chair ...
Page 26: ...Notes 24 ...
