2-2
Installation and Operation Manual
X-VA-1110-1140-eng
Part Number: 541B040AHG
March, 2008
Brooks
®
1110 and 1140 Series
Section 2 Installation
2-4 Return Shipment
Prior to returning any instrument to the factory, contact your nearest
Brooks location for a Return Materials Authorization Number (RMA#). This
can be obtained from one of the following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554-FLOW (3569)
Tel (215) 362-3700
Fax (215) 362-3745
E-mail: [email protected]
www.BrooksInstrument.com
Brooks Instrument
Brooks Instrument
Neonstraat 3
1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands
Tokyo, 136-0073 Japan
P.O. Box 428
Tel 011-81-3-5633-7100
6710 BK Ede, Netherlands
Fax 011-81-3-5633-7101
Tel 31-318-549-300
Email: [email protected]
Fax 31-318-549-309
E-mail: [email protected]
All flow instruments returned to Brooks requires completion of Form
RPR003-1, Brooks Instrument Decontamination Statement, along with a
Material Safety Data Sheet (MSDS) for the fluid(s) used in the instrument.
Failure to provide this information will delay processing by Brooks
personnel. Copies of these forms can be downloaded from the Brooks
website www.BrooksInstrument.com or are available from any Brooks
Instrument location listed above.
2-5 Transit Precautions
To safeguard against damage during transit, transport the instrument to
the installation site in the same container used for transportation from the
factory if circumstances permit.
2-6 Removal from Storage
Upon removal of the instrument from storage, a visual inspection should
be conducted to verify its "as-received" condition.
