2022/01/06
FT128 Quick Operation Guide
Page
5
of
6
FAULT: High current on COM-loop
Page: 66
FAULT: Input
Page: 66
FAULT: Input x exp board x
Page: 67
FAULT: Interlocking input AA/PP
Page: 67
FAULT: Loop unit zz - aa ?
Page: 67
FAULT: Loop unit techn. address xxx ?
Page: 67
FAULT: Low battery capacity
Page: 67
FAULT: Low voltage
Page: 67
FAULT: Low voltage, techn address xxx
Page: 67
FAULT: Mains
Page: 67
FAULT: Mains, external power supply
Page: 68
FAULT: Mains, techn address xxx
Page: 68
FAULT: No reply zz-aa ?
Page: 68
FAULT: No reply techn. address xxx ?
Page: 68
FAULT: No reply AAU x
Page: 68
FAULT: No reply EPU x
Page: 68
FAULT: No reply, expansion board x
Page: 69
FAULT: Output Sx
Page: 69
FAULT: Output x expansion board x
Page: 69
FAULT: Output x, techn addr xxx
Page: 69
FAULT: Read/write site data (SSW)
Page: 70
FAULT: Restart, code xx addr yyyyyyyyyyy
Page: 70
FAULT: Sensor zone: xxx address: xx
Page: 70
FAULT: Sensor zone zz-aa, zz-aa ?
Page: 70
FAULT: Sensor zone techn. address xxx ?
Page: 70
FAULT: Several faults on COM-loop
Page: 70
FAULT: Short-circuit, internal COM-loop
Page: 70
FAULT: Short-circuit SCI nn <-> SCI nn
Page: 71
FAULT: Site specific data (SSD)
Page: 71
FAULT: Site specific data (SSD), AAU x
Page: 71
FAULT: Site specific data (SSD), EPU x
Page: 71
FAULT: Supervised input x addr xxx
Page: 71
FAULT: Wrong type, expansion board x
Page: 71
FAULT: Wrong type of unit zz-aa ?
Page: 72
FAULT: Wrong type of unit t.addr xxx ?
Page: 72
FAULT: Zone line input zz-aa
Page: 72
FAULT: Zone line input t.addr xxx
Page: 72
FAULT: Zone line input x exp board x
Page: 72
12
– EBLWin SOFTWARE INSTALLATION to PC
1.
Refer to Operation Manual FT128 Rev 2.4,
PAGE 75.
2. Needed Hardware
a. EBLWin key 5094
b. Null modem serial cable
c. USB to Serial Converter to USB adapter
d. Laptop with Win7 - Win10