Brooks CryoPod, Quick Start Manual

Page: 5 / 32

English
I
5
Indicator / Symbol Description Resolution
Alarm ALARM text and alarm number with red back-light will
display if alarm is triggered. An audio alert will also
sound for 20 minutes before automatically shutting off. Resolve alarm as
needed.
Empty (outline)
battery indicator A full charge has three (3) solid bars. Two (2) bars =
50%. One (1) bar = 25%. Outline only = <13% Replace batteries as
needed.
CaL Displayed in the ID field, this indicates a temperature
display issue. Contact Technical
Support.
HI Cryogenic chamber temperature is above 49°C; no data
is recorded Add LN2 as needed.
HL The connection point between thermocouple wires and
the instrument electronics module (“cold junction”)
is above its operating limit of 49 °C; “Not valid”
temperature will be reported in the log file Contact Technical
Support.
Key Displayed in the three (3) digits ID Code area; this
indicates one or more keys are lodged in a depressed
position. Depress keys to
dislodge.
LL The connection point between thermocouple wires and
the instrument electronics module (“cold junction”)
is below its operating limit of 49°C; “Not valid”
temperature will be reported in the log file. Contact Technical
Support.
LO Chamber temperature is below -199°C; “Not valid”
temperature will be reported in the log file. Contact Technical
Support.
Low Memory Available memory is running low, and will only
record up to 6 additional hours of log data when first
displayed. Download log data
immediately to free
up space.
not SET
(Date/Time) “not SET” indicates that the date/time are not set; if
time is not programmed, “not SET” is displayed at all
times. Program date and/or
time in Set-Up.
OFF OFF indicates that the internal basket is above -20°C.
If OFF is displayed while unit is on, unit will turn OFF
automatically within one (1) minute if no button activity
is detected. Fill with LN2 as
needed.
OP Service issue: Thermocouple detachment detected. Contact Technical
Support.
Service SERVICE message indicates a technical support issue
such as thermocouple detachment (OP) or corrupted
temperature correlation (TMP), stuck key (KEY),
EPROM reading error (EP), thermocouple chip error
(TIC). Message will automatically turn OFF if issue is
resolved. Contact Technical
Support.
TMP Displayed in the three (3) digit ID Code area, this
indicates the pre-loaded data needed for temperature
indication is corrupted. Contact Technical
Support.