ARRANGEMENT
AND
ELEMENTS
REPLACEMENT
/
ENG We will find a rectangular piece inside the combustion chamber, which is the
deflector. The absence of a deflector causes a big depression with a very fast
combustion, excessive wood consumption, and the subsequent overheating
of the equipment. It normally comes installed from the factory and to remove
it we need to proceed as follow:
2.1 DEFLECTOR
2.2
INTERNAL SHEETS.
ENG The internal part of the combustion chamber consists of vermin
culite sheets and we should never use the equipment if these sheets have
been removed.
In case of breaking the sheets, in order to replace it we need to remove the
deflector and proceed as follow:
Start by removing one of the sides; to do so we need to raise the sheet a little
bit and then bend it so as to get it out.
