Bronkhorst®
Instruction Manual Controlled Evaporator and Mixer
9.17.126A
7
1
Introduction
1.1
Scope of this manual
This manual contains general product information, installation and operating instructions and troubleshooting tips for the
Bronkhorst®
Controlled Evaporator and Mixer
(CEM).
1.2
Intended use
The Bronkhorst® CEM is designed for mass flow control of vapours created from liquid and gas, using the media and
operating conditions (e.g. temperature, pressure) as specified at ordering time.
The equipment is suited for general purpose indoor (dry) applications, like laboratories and machine enclosures.
The end user is considered to be familiar with the necessary safety precautions, and to comply with the appropriate
protective measures as described in the Material Safety Data Sheets of the media to be used in the system (if applicable).
The wetted materials incorporated in the CEM are compatible with media and conditions (e.g. pressure, temperature) as
specified at ordering time. If you are planning to use the product (including any third party components supplied by
Bronkhorst, such as pumps or valves) with other media and/or other conditions, always check the wetted materials
(including seals) for compatibility. See the technical specifications of the product and consult third party documentation (if
applicable) to check the incorporated materials.
Responsibility for the use of the equipment with regard to suitability, intended use, cleaning and corrosion resistance of the
used materials against the applied media lies solely with the end user. Bronkhorst High-Tech B.V. cannot be held liable for
any damage resulting from improper use, use for other than the intended purpose or use with other media and/or under
other conditions than specified on the purchase order.
