22
1
Function activated with low sensitivity
2
Function activated with medium sensitivity
3
Function activated with high sensitivity
3. To return to stand-by mode, press and immediately release the
PTT
communication button. The parameters set up to now will
be saved. If the VOX function is activated, the word “
VOX
” will
appear on the display.
6.11 TRANSMISSION OVER TONE (“ROGER BEEP”)
ACTIVATION/DEACTIVATION
The “Roger Beep” is a tone issued by your handset every time you
release the PTT communication button after transmission.
To activate or deactivate this tone, follow the simple programming
procedure described below:
1. Press the
MENU
button 5 times. The handset will enter the
“Roger Beep” programming procedure and the letters “
ro
” will
appear in small print on the display, accompanied by “
On
” in
big print, fl ashing.
2. Press
the
+
or
–
buttons to deactivate (“
Of
” on the display) or
activate (“
On
” on the display) the tone.
3. To exit this programming procedure, press and immediately
release the
PTT
communication button; the parameters set up
to now will be saved.
6.12 BUTTON TONES: ACTIVATION/DEACTIVATION
Every time you press a button, your handset issues a tone. You
can activate or deactivate this signal by following the simple
programming procedure described below:
1. Press
the
MENU
button 6 times. The handset will enter the button
tone programming procedure and the letters “
to
“ will appear
in small print on the display, accompanied by “
On
” in big print,
fl ashing.