1300 276 642
bromicrefrigeration.com.au
10
5. OPERATION
Start-up
• Connect the appliance to the mains power supply and turn on the main switch by flipping
it upward.
• The compressor and condenser fan should operate within 3 minutes after the main switch
is turned on.
• The electronic controller will display the current cabinet temperature after the
Refrigeration switch is turned on.
• The LED indicates that refrigeration circuit is operating.
• During the start-up delay (3 minutes), the LED is flashing.
• The LED indicates that the refrigeration circuit is defrosting.
Setting the temperature
i. Press the button for more than 3 seconds.
ii. The value of the set point will be displayed and the ‘°C’ or ‘°F’ LED starts blinking.
iii. Press or arrow key within 10 seconds to adjust the set point.
iv. Press the key again or wait 10 seconds.
Summary of Contents for QUALITY MATTERS 3735204-NR
Page 15: ......
