Bromic Heating DD0150CG, User Manual

Page: 4 / 12

3. INSTALLATION AND ASSEMBLY
The unit must not be moved from its standard vertical position, however as necessary, some appliances may be placed face down only as
indicated on the packaging.
You are advice to unpack the unit standing on a solid, flat and stable surface. In order to transfer it to the installation location, a trolley or fork-lift
may be of help. It should not be dragged along the ground and always watch out to ensure it is not off-balance.
Next, remove the packaging to leave the unit completely free of all coverings and packing material, whilst avoiding knocks to the appliance,
scratching it or unscrewing the feet.
Once place in its final location, it should be pulled away from the wall so that there is a space of 10 cm at the back and a minimum of 10 cm to
the sides.
The unit is equipped with drain cleaning, we recommend connecting it directly to the appropriate device or a receptacle should be positioned in
order to collect the water.
FIRST CLEANING
First of all, remove the protective film from stainless steel using any non-sharp object. Remove also possible glue remains using alcohol.
Avoid completely the use of tools or elements that may be able to scratch or damage the unit. Once cleaned and dry, assemble accessories on
correspondent places.
We recommend a regular cleaning of the stainless steel with some neutral soap, warm water and sponge, drying it afterwards. DO NOT USE
ANY DETERGENTS, ANY PRODUCT CONTAINING CHLORIDE, SULPHIDE OR ANY OTHER ABRASIVE AGENTS. ALWAYS KEEP
ELECTRIC PARTS AWAY FROM WATER.
ATTENTION
Please do not use iron, nickel sponges to clean STAINLESS STEEL or leave them lying on the surface as the iron deposits can stick and cause
the formation of rust contamination, thus jeopardising the hygiene of the surface.
10 cm
10 cm